SUNLU Standard Resin 1000G

SUNLU Standard Resin 1000G is easy to use and is suitable for for those
who are new to resin 3D printers.  

Features,

High Accuracy Prints: SUNLU worked on ways to reduce volume shrinkage. Providing you with high precision, smooth surface print results

Low Viscosity, Fast:  SUNLU 3D print resin will fast cure when it absorbs 405nm UV light from a resin 3d printer.

Wide Compatibility: Fast cure when it absorbs 395-405nm UV light suitable for most 2K/4K/8K resin 3D printers(LCD/DLP/SLA)

Low Irritating Odour: The smell is relatively light, and the resin odor will quickly dissipate after printing

Available in Light Grey or Dark Grey

How to Use:

1. Environmental requirements: 20-30°C ambient temperature, do not print near windows or in other environments exposed to UV light, and try to keep away from children and pregnant woman.
2. Shake the 3d print resin well before use to prevent the components from solidification.
3. Wear nitrile gloves and a protective mask when using the resin and keep the room ventilated.
4. The residue on the surface of the printed resin parts can be washed with alcohol at a concentration of 95% or more, and it is recommended that the cleaning process should not take more than 1 minute.
5. pores and other details of the alcohol is not easy to clean to the place can be used ultrasonic or filled with alcohol syringes and other auxiliary tools to clean, and alcohol should not be cleaned too many times to ensure the purity of alcohol, the concentration of impure alcohol cleaning model will lead to whitening and wash the phenomenon of unclean. Specific cleaning time, until the surface of the resin parts no sticky feeling, no residual resin in the pores of the effect shall prevail.
6. Drain or blow dry the residual alcohol after cleaning and place under UV light or sunlight, and irradiate all parts of the model evenly until the surface of the resin parts feels dry and hard enough.
7. Use hand sanitizer or dishwashing liquid to wash away any resin residue on the skin, but try not to touch the alcohol-washed resin residue with your hands.
8. If the resin accidentally gets into your eyes or mouth, wash it off immediately with plenty of water and consult a doctor if you feel unwell.

Safe Package: Thickened aluminum bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to ensure the resin stays in right place.

Photopolymer Standard Resin Data Sheet. See last 4 photos